|
Modelo nº. |
PO40 |
PO60 |
|
Tamanho |
Φ40mm×L50mm |
Φ63mm×C76mm |
|
Peso (sem suporte) |
260g |
880g |
|
Tipo de transmissão |
Infravermelho de 360° |
Infravermelho de 360° |
|
Distância de transmissão |
5m |
6m |
|
Modo de inicialização |
Código M |
Código M.Revolve |
|
Velocidade de rotação |
Máximo 1000 rpm |
Máximo 1000 rpm |
|
Fonte de energia |
1 pilha AA de 3,6 V x 2 |
Pilha AA 1,5V/3,6V×2 |
|
Direção de ativação |
±X/±Y/-Z |
±X/±Y/-Z |
|
Repetibilidade do disparo unidirecional 2δ |
1 μm |
2 μm |
|
Sobrecarga máxima*2 |
XY: 12,5 mm + Z: 6 mm |
XY:21mm +Z:11mm |
|
Força de disparo XY*3 |
0,5N ~ 0,9N |
Ajustável de 0,5N a 1,6N |
|
Força de ativação Z |
5,8N |
Ajustável de 3,5N a 14N |
|
Aplicativo |
Centro de usinagem de 3 e 5 eixos de pequeno e médio porte |
Grande máquina-ferramenta tipo pórtico, centro de usinagem horizontal |
When the stylus is displaced radially or axially by an external force, the trigger unit is activated.
The probe’s internal circuit sends a trigger signal to the receiver, which then transmits it to the machine.
The current coordinates of each machine axis are automatically recorded.
Measurement results are finally calculated from the coordinate data of the relevant points.
Aplicações
Automobile manufacturing and auto parts industry
Automatic workpiece alignment, centering and coordinate setting; measurement of hole diameter, hole pitch, groove width and step height; inspection of key surfaces including flatness, perpendicularity and coaxiality.
Aerospace manufacturing industry
Profile and wall thickness measurement for complex cavities, deep cavities and frame-beam parts; profile inspection for blades, blisks and casings; control of position and coaxiality of key assembly holes.
Mold manufacturing industry
Inspection of mold deep cavities, sharp corners and slider positions; measurement of position accuracy for mold parting surfaces, support surfaces and ejector pin holes.
Precision instrument and meter industry
High-precision measurement of micro-holes, narrow grooves and thin-walled parts; dimensional control for optical components, sensor housings and micro-structures.
Construction machinery manufacturing industry
Actual measurement and machining coordinate correction for deformed welded parts; inspection of articulated holes, pin shaft holes and mounting surface flatness.
New energy equipment manufacturing industry
Monitoring of flatness and hole pitch for battery pack housings and end covers; dimensional inspection of thin-walled parts and flow field plates for photovoltaic / hydrogen energy equipment.
Nenhum vídeo disponível
Destaques
1
High repeatability: One-way repeatability <1μm
2
Long standby time: As long as 6 months
3
Omnidirectional energy-absorbing design: 360* omnidirectional energy-absorbing design,which helps to cushion the spindle in impact when an operating accident occurs
4
Waterproof design: lP68 for probe and receiver
5
Intelligent LED indicators: Show current working status of the probe
Tem alguma dúvida sobre este produto?
Entre em contato conosco
