|
Produto |
Sonda de rádio |
Sonda óptica |
Sonda óptica |
Sonda óptica |
|
Modelo |
DMP84.1 |
DMP84.2 |
DMP84C |
DMP86.2 |
|
Imagem |
|
|
|
|
|
Direção de ativação da caneta |
±X,±Y,+Z |
±X,±Y,+Z |
±X,±Y,+Z |
±X,±Y,+Z |
|
Proteção contra AVC por Gatilho de Agulha |
XY±15°, Z+5mm |
XY±15°, Z+5mm |
XY±15°, Z+5mm |
XY±15°, Z+5mm |
|
Força de anisotropia da ponta de prova (configuração de fábrica) |
XY = 0,9 N, Z = 6,0 N |
XY = 0,9 N, Z = 6,0 N |
XY = 0,9 N, Z = 6,0 N |
XY = 1,0 N, Z = 6,0 N |
|
Repetição de gatilho unidirecional aleatório (precisão de 2σ) |
≤1μm |
≤1μm |
≤1μm |
≤1μm |
|
Alcance de transmissão de sinal |
≥10M |
Dividido em 3 níveis: 1M/3M/5M |
Dividido em 2 níveis: 1M/3M |
≤5M |
The trigger unit is activated when the stylus is subjected to external force and generates radial or axial displacement.
The internal circuit of the probe transmits a trigger signal to the receiver. Optical probes use infrared transmission, while wireless probes adopt 2.4G signal transmission. The receiver then forwards the signal to the machine tool system.
The current coordinates of each machine tool axis are automatically recorded.
The final measurement results are calculated based on the coordinate data of relevant points.
Aplicativos
Automotive Manufacturing & Parts Industry
Automatic workpiece alignment, centering and coordinate setting; measurement of hole diameter, hole pitch, groove width and step height; inspection of key surfaces including flatness, perpendicularity and coaxiality.
Aerospace Manufacturing Industry
Profile and wall thickness measurement for complex cavities, deep cavities and frame-beam parts; profile inspection for blades, blisks and casings; control of position and coaxiality of key assembly holes.
Mold Manufacturing Industry
Inspection of mold deep cavities, sharp corners and slider positions; measurement of position accuracy for mold parting surfaces, support surfaces and ejector pin holes.
Precision Instrument & Meter Industry
High-precision measurement of micro-holes, narrow grooves and thin-walled parts; dimensional control for optical components, sensor housings and microstructures.
Construction Machinery Manufacturing Industry
Actual measurement and machining coordinate correction for deformed welded parts; inspection of articulated holes, pin shaft holes, and mounting surface flatness.
New Energy Equipment Manufacturing Industry
Monitoring of flatness and hole pitch for battery pack housings and end covers; dimensional inspection of thin-walled parts and flow field plates for photovoltaic / hydrogen energy equipment.
Nenhum vídeo disponível
Destaques
1
High stability, high precision and superior quality
2
Compact design with a smaller footprint for a broader application scope
3
Excellent anti-interference performance, allowing installation of more units in the same area
4
Ultra-low power consumption design. Two LS14250 batteries support over 800,000 continuous measurement cycles
5
Modular probe structure for extremely low maintenance costs
6
Robust and reliable design equipped with a buffer mechanism to protect machine tool spindles
7
Adopts CR360 technology for greatly improved circular corner performance
8
The system enables control of the machine tool probe via simple PLC commands from the machine
Tem dúvidas sobre este produto?
Entre em contato conosco
