|
모델 번호 |
PO40 |
PO60 |
|
크기 |
직경 40mm × 길이 50mm |
Φ63mm×L76mm |
|
무게(지지대 제외) |
260g |
880g |
|
변속기 종류 |
360° 적외선 |
360° 적외선 |
|
전송 거리 |
5m |
6m |
|
시작 모드 |
코드 M |
코드 M.리볼브 |
|
회전 속도 |
최대 1000rpm |
최대 1000rpm |
|
전원 공급 장치 |
1/2AA 3.6V 배터리 2개 |
AA 1.5V/3.6V 배터리 2개 |
|
트리거 방향 |
±X/±Y/-Z |
±X/±Y/-Z |
|
일방향 트리거링 2δ의 반복성 |
1 μm |
2 μm |
|
최대 오버런*2 |
XY축: 12.5mm +Z축: 6mm |
XY:21mm +Z:11mm |
|
XY 트리거 힘*3 |
0.5N~ 0.9N |
0.5N~1.6N 조절 가능 |
|
Z 트리거 포스 |
5.8N |
3.5N~14N 조절 가능 |
|
애플리케이션 |
소형 및 중형 3축, 5축 가공 센터 |
대형 갠트리 공작기계, 수평형 머시닝 센터 |
When the stylus is displaced radially or axially by an external force, the trigger unit is activated.
The probe’s internal circuit sends a trigger signal to the receiver, which then transmits it to the machine.
The current coordinates of each machine axis are automatically recorded.
Measurement results are finally calculated from the coordinate data of the relevant points.
응용
Automobile manufacturing and auto parts industry
Automatic workpiece alignment, centering and coordinate setting; measurement of hole diameter, hole pitch, groove width and step height; inspection of key surfaces including flatness, perpendicularity and coaxiality.
Aerospace manufacturing industry
Profile and wall thickness measurement for complex cavities, deep cavities and frame-beam parts; profile inspection for blades, blisks and casings; control of position and coaxiality of key assembly holes.
Mold manufacturing industry
Inspection of mold deep cavities, sharp corners and slider positions; measurement of position accuracy for mold parting surfaces, support surfaces and ejector pin holes.
Precision instrument and meter industry
High-precision measurement of micro-holes, narrow grooves and thin-walled parts; dimensional control for optical components, sensor housings and micro-structures.
Construction machinery manufacturing industry
Actual measurement and machining coordinate correction for deformed welded parts; inspection of articulated holes, pin shaft holes and mounting surface flatness.
New energy equipment manufacturing industry
Monitoring of flatness and hole pitch for battery pack housings and end covers; dimensional inspection of thin-walled parts and flow field plates for photovoltaic / hydrogen energy equipment.
사용 가능한 동영상이 없습니다.
하이라이트
1
High repeatability: One-way repeatability <1μm
2
Long standby time: As long as 6 months
3
Omnidirectional energy-absorbing design: 360* omnidirectional energy-absorbing design,which helps to cushion the spindle in impact when an operating accident occurs
4
Waterproof design: lP68 for probe and receiver
5
Intelligent LED indicators: Show current working status of the probe
이 제품에 대해 질문이 있나요?
우리에게 연락하세요
